Autel EVO NANO Series APP & Firmware Upgrade FAQ

Autel RC Drone .. ...
Post Reply
RC Enthusiast No.1
Posts: 386
Joined: Thu Nov 14, 2019 3:59 am
Contact:

Autel EVO NANO Series APP & Firmware Upgrade FAQ

Post by RC Enthusiast No.1 » Thu Jun 30, 2022 12:19 pm

Autel EVO NANO Series APP & Firmware Upgrade FAQ

* Can I disconnect from the network to continue the upgrade after the firmware download is completed?
Yes.

* What will cause the upgrade to fail?
a.If you turn off the device during the upgrade process, it will cause the upgrade to fail.
b.If you disconnect during the firmware package download process, the upgrade will fail.
c.Make sure the remaining power of the battery and remote control is ≥ 30% before upgrading.

* How to upgrade the firmware?
Method : Download the firmware upgrade package from Autel Sky app
1. Open the remote controller and the aircraft, connect your phone to the remote controller and run the Autel Sky app.
2. When the system detects a new firmware version, Autel Sky app will automatically pop up a prompt box after connecting to the aircraft to remind you to download and install.
3. Please follow the instructions on the Autel Sky app to update the firmware, users can check the upgrade process through the app interface.
4. Please restart the flight device and remote controller after the upgrade is completed.

* What smart phone systems does Autel Sky app support?
iOS 12.0 and above
Android 8.0 and above

* How to upgrade the Autel Sky App?
When the system detects a new App version, the App will automatically pop up a prompt after connecting to the flight, and users can follow the prompt to upgrade the App.

Replacement parts URL:
Autel EVO Nano / Nano+ RC Drone and Spare Parts list
https://www.linparts.com/autel-evo-nano ... _1354.html

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest